เครื่องทดสอบความต้านทานไฟฟ้าพื้นผิว Surface Resistance Meter รุ่น AE-780A

เครื่องทดสอบความต้านทานไฟฟ้าพื้นผิว > Surface Resistance Tester > เครื่องวัดความต้านทานผิววัสดุ > ESD อีเอสดี > Surface Resistance Meter  รุ่น AE-780A เครื่องวัดไฟฟ้าสถิตย์ > เครื่องมือวัดไฟฟ้าสถิต > เครื่องตรวจสอบไฟฟ้าสถิตย์ เครื่องมือทดสอบไฟฟ้าสถิตย์ เครื่องวัด ESD

AE-780A : Surface Resistance Meter ยี่ห้อ Armeka, Finland

ARMEKA AE-780A ESD Meter ESD, Tester ESD, Checker, เครื่องมือวัดไฟฟ้าสถิตย์, ทดสอบไฟฟ้าสถิต

The AE-780A Surface Resistance Checker is a portable battery powered checker fitted with built-in parallel electrodes that allow for tests of material surface resistance. This meter is designed for quick checks of surface resistance for ESD control applications in electronics manufacturing or handling environment. The Surface Resistance Checker is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 1 x 10E5 ohms. Two banana jacks and an electrode toggle switch allow for the connection of two external 5 pound electrodes that measure surface resistance point to point (RPP) or resistance to equipment ground (RTG).

Features:

  • Use both 5 pound electrodes for RPP.
  • Use one 5 pound electrode and one lead to groundable point for RTG (note: groundable points are usually snaps installed on the material or workstation common point ground).
  • Ensure that the item being measured is electrically isolated (i.e. placed on an insulative surface) as the checker will measure the lowest resistance path.
  • Ensure that the test leads are separated as a best practice.
  • When using the 5 pound electrodes.
  • Place no closer than 2” from the edge of the surface being measured.
  • Place no closer than 3” to any groundable point.
  • Place the 5 pound electrodes about 10” apart for RPP of worksurface and 3’ for floor.
  • Preferred placements include: most commonly used surface portion, most worn, center, and furthest from groundable point.
  • For RTG, connect the banana plug to groundable point.
  • If surface has sections (floor tiles, garment panels), for RPP place the 5 pound electrodes on different sections.
 
Specifications:
 Measurement Range
 103 - 1012  Ohms per square
 Accuracy
 ±½ decade
 Test Voltage
 10V to 100V
 Power Supply
 9V alkaline battery
 Weight 
 200g
 Size   
 148 x 90 x 25 mm
 
Accessories:
  • AE-780A comes with Travel Electrodes 2pcs, One Alligator Clip, One Metal Plate, Two Cables, Calibration Certificate, Manual and Hard carry case.
 
CE      เครื่องทดสอบความต้านทานไฟฟ้าพื้นผิว Surface Resistance Meter รุ่น AE-780A

หมายเหตุ ::
• ราคาสินค้ารวม ยังไม่รวมภาษีมูลค่าเพิ่ม 7%
• ราคาสินค้าไม่รวมค่าขนส่ง
• สเปคและราคาสินค้าอาจมีการเปลี่ยนแปลงโดยไม่แจ้งให้ทราบล่วงหน้า

measuring instruments Download Brochure ดาวโหลดโบร์ชัวร์สินค้า
 
Download   Armeka AE-780A Brochure ( 0KB )

 สั่งซื้อสินค้าออนไลน์ Online Store :

Visitors: 98,391