เครื่องวัดความสั่นสะเทือน Vibration Meter LANDTEK VM-6320

เครื่องวัดความสั่นสะเทือน > Vibration Meter เครื่องวัดแรงสั่นสะเทือน

เครื่อง มือวัดความสั่นสะเทือนแบบพกพา มีขนาดเล็ก น้ำหนักเบาเหมาะสำหรับใช้ในการตรวจวัดความสั่นสะเทือนของเครื่องจักรเพื่อ ตรวจหาสาเหตุหรือแนวโน้ม ที่จะเกิดความเสียหาย เพื่อเป็นแนวทางในการวางแผนงานซ่อมบำรุงได้อย่างมีประสิทธิภาพ Vibration Pen Meter มีขนาดเล็ก ใช้งานง่ายและสะดวกพกพา

VM-6320: Vibration Meter เครื่องวัดความสั่นสะเทือน ยี่ห้อ LANDTEK

Measures acceleration, velocity, and displacement

The Vibration Meter is smalll in size, light in weight, easy to carry, Although complex and advanced, it is convenient to use and operate. Its ruggedness will allow many years of use if proper operating techniques are followed. Please read the following instructions carefully and always keep this manual within easy reach.
 
Features:
 
  • In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
  • Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
  • Individual high quality accelerometer for accurate and repeatable measurements.
  • LCD digital display.
  • Lightweight and easy to use
  • Max. Value Hold
  • Low Battery Indicator
  • Wide frequency range (10Hz. to 10kHZ.) in acceleration mode
  • Automatic power shut off to conserve power.
  • Can communicate with PC computer for statistics and printing by the optional cable and the software for RS232C interface.

 

Specification:

 Display  4 digits, 18mm LCD Measured values and makers Zunit, 10, and battery symbol)
 Tranducer  Piezoelectric Accelerometer
 Parameters Measuring  Velocity, Acceleration, and Displacement
 Measuring Range  Velocity: 0.01~200.0 mm/s True RMS
 Acceleration: 0.1~200.0 m/s² Equivalent Peak
 Displacement: 0.001~2.000 mm Peak-Peak value
 Frequency Range  Acceleration: 10Hz ~ 1kHz. In '1' mode
                  10Hz ~ 10k Hz. In '10' mode for bearing condition check
 Velocity: 10Hz ~ 1kHz.
 Displacement: 10Hz ~ 1kHz.
 Accuracy  ±5% +2 digits
 PC interface  RS232C
 Analogue Output  AC Output 0~2.0 V Peak full scale (load resistance: above 10k)
 Power Supply  4 x 1.5V AA size (UM-3) Battery
 Dimensions  160 x 68 x 32 mm (6.3 x 2.7 x 1.2 inch)
 Weight  181 g (Not Including Batteries)

 

Accessories:

 

  • Powerful rare earth magnet.................1 pc.
  • Accelerometer.....................................1 pc.
  • Stinger probe (Cone)..........................1 pc.
  • Stinger probe (Ball).............................1 pc.
  • Carrying case......................................1 pc.
  • Operation manual................................1 pc.

 

Optional Accessories:

  • Cable and Software for RS232C
  • Headphones for use as electronic
accessories    LANDTEK VM-6320 :เครื่องวัดแรงสั่นสะเทือน Vibration Meter    เครื่องวัดความสั่นสะเทือน Digital Vibration Meter LANDTEK VM-6320
 
หมายเหตุ ::
• ราคาสินค้ารวม ยังไม่รวมภาษีมูลค่าเพิ่ม 7%
• ราคาสินค้าไม่รวมค่าขนส่ง
• สเปคและราคาสินค้าอาจมีการเปลี่ยนแปลงโดยไม่แจ้งให้ทราบล่วงหน้า

Vibration Meter เครื่องวัดความสั่นสะเทือน Vibration Meter เครื่องวัดความสั่นสะเทือน VM-6320
measuring instruments  Download ดาวน์โหลดไฟล์ข้อมูลสินค้า
 

สั่งซื้อสินค้าออนไลน์ Online Store :

Visitors: 98,355